Simple operation for instant communication
The IC-F3003 series is so easy to use there’s no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.
Easy to hear in noisy areas
The radio provides 1500 mW* loud and clear audio with Icom custom high power handling capacity speaker. Clear communication is available even in noisy environments.
* Typical with internal speaker
The combination of the optional HM-222HLWP and the IC-F3003 series* also provides 1500 mW (typ.) loud audio from the attached speaker-microphone.
* For the transceiver with a “U” mark on the serial number label.
Longer operating time
A new high efficiency FET of the IC-F3003 series reduces consumption current and provides up to 22 hours* of operating time with the BP-298, 2250 mAh (typical) supplied battery pack.
*Tx:Rx:Standby=5:5:90. Power save function ON.
Weather resistant, dust protection, military rugged
While the radio is a compact unit with a height of only 111 mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD- 810 environmental tests. In short, the IC-F3003 series is built rugged!
Internal VOX capability for hands-free operation
The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004LA can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
Selective calling, quiet stand-by and more
2-Tone and 5-Tone signaling gives you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
Scan features
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The TX channel and talk back functions allow you to make a quick response while scanning.
Other Features
- DTMF autodial
- CTCSS/DTCS encoder/decoder
- BIIS PTT ID transmission
- MDC PTT ID and emergency
- Low battery alert
- 2-step power save
- PC programmable
- Time out timer
- Talk around function
- Lone worker function
- Enhanced emergency
- 3-color LED
- Surveillance function
General
| IC-F3003 | IC-F4003 | |||
|---|---|---|---|---|
| Frequency range (Varies according to version) |
136 MHz–174 MHz | 450–520 MHz 400–470 MHz |
||
| Number of memory channels | 16 channels | |||
| Type of emission | 11K0F3E/16K0F3E | |||
| Channel spacing | 12.5 kHz/25 kHz | |||
| Power supply requirement | 7.2 V DC | |||
| Current drain (approximate) |
Tx | High | 1.3 A | 1.6 A |
| Rx | Stand-by | 75 mA | 70 mA | |
| Max. audio | 500 mA (Internal SP) | |||
| Antenna impedance | 50 Ω | |||
| Operating temperature range | –30°C to +60°C, –22°F to +140°F (Radio only) | |||
| Dimensions (W×H×D) (Projections are not included) |
58×111×35.5 mm, 2.3 × 4.4 × 1.4 mm (With BP-298) |
|||
| Weight (approximate) | 265 g, 9.3 oz (With BP-298) | |||
Transmitter
| IC-F3003 | IC-F4003 | |
|---|---|---|
| RF output power (at 7.2V DC) | 5 W, 2 W, 1 W (Hi, L2, L1) | |
| Max. frequency deviation | ± 5.0 kHz/±2.5 kHz (Wide/Narrow) | |
| Frequency stability | ±2.5 ppm | |
| Spurious emissions | 70 dB minimum | |
| Residual modulations | 58/53 dB typical (Wide/Narrow) |
53/48 dB typical (Wide/Narrow) |
| Audio harmonic distortion (AF 1 kHz 40% deviation) |
1.0%/1.5% typical (Wide/Narrow) |
|
Receiver
| IC-F3003 | IC-F4003 | ||
|---|---|---|---|
| Sensitivity (at 12dB SINAD) | 0.25dBμV typical | ||
| Adjacent channel selectivity (W/M/N) | 78 dB/70 dB typical | 73 dB/65 dB typical | |
| Spurious response rejection | 70dB minimum | ||
| Intermodulation rejection | 75 dB typical | 74 dB typical | |
| AF output power (at 5% distortion 8Ω load ) |
Internal SP | 1500 mW typical | |
| External SP | 400 mW typical (single end) 1500 mW typical (BTL, HM-222HLWP connected*) |
||
Reviews
There are no reviews yet.